The structural principle and characteristics of stainless steel pressure gauge

Structure and principle:
The stainless steel pressure gauge system (including joints, springs, etc.), gear transmission mechanism, indicating device (pointer and dial) and housing, pressure relief back cover, gauge glass, etc. The shell is an airtight structure that can effectively protect internal components from environmental influences and contamination, while preventing leakage of silicone oil in the filling meter; Secondly, this instrument has a hard stainless steel interlayer between the sensitive components and the glass, which protects the user from debris and measurement medium damage in case of accidental explosion; At the same time, once the pressure inside the case exceeds a certain value, the back cover of the instrument panel, which is equipped with rapid pressure relief and stability, will open to release the pressure inside the case. In addition, the liquid filling meter can also resist the impact of severe working environment and fluctuation of medium pressure.

Key Features:
1. Y-100A stainless steel pressure gauge pressure range: 0-0.6bar/0-7000bar
2. Accuracy level: 0.6/1.0/1.6
3. Wetting material: -1=brass/bronze, -2=copper alloy, -3=stainless steel, -6=Montessori alloy
4. Stainless steel pressure gauge connection methods: radial connection (no code), axial connection (r), front edge connection, rear edge connection.
5. Stainless steel pressure gauge process connection: 1/4 "BSP, 1/2" BSP, 1/4 "NPT, M12 * 1.5, 1/2" NPT or M20 * 1.5
6. Stainless steel pressure gauges have dial materials: carbon steel, stainless steel, glass fiber reinforced polyimide
7. Scale units MPA, KPA, PSI, BAR, kg/cm2, "H2O," Hg
8. Aluminum fine adjustment pointer
9. Lower pointer, high value pointer
10. Stainless steel pressure gauges have special dials, such as dual range, special units, clear scales, and so on
11. Durable front panel with pressure relief back cover and stable structure
12. Welded Bourdon tube can extend the service life of Bourdon tube
13. Overvoltage/vacuum protection measures: Overvoltage protection stop pin, vacuum protection stop pin
14. Table glass: shockproof glass/laminated stable glass
15. Damping nail: effectively eliminates pulsation
16. Oil filling: able to resist the pulsation of the measured medium pressure and the impact of severe vibration in the working environment, while balancing corrosion resistance and seismic performance